Reassembly

2GR-FE LUBRICATION: OIL PUMP: REASSEMBLY

1. INSTALL OIL PUMP COVER

(a) Install the drive and driven rotors into the timing chain cover with the rotors' marks facing the cylinder block side. Check that the rotors revolve smoothly.





(b) Install the oil pump cover with the 8 bolts.





Torque : 9.0 Nm (92 kgf-cm, 80 in-lbf)

HINT
Bolt length:

22 mm (0.87 in.) for bolt A

40 mm (1.58 in.) for bolt B

2. INSTALL OIL PUMP RELIEF VALVE

(a) Coat the oil pump relief valve with engine oil.

(b) Install the relief valve and relief valve spring into the timing chain cover hole.

(c) Using a 27 mm socket wrench, install the plug.





Torque : 49 Nm (500 kgf-cm, 36 ft-lbf)