Neutral Safety Switch: Adjustments

U151E AUTOMATIC TRANSAXLE: PARK / NEUTRAL POSITION SWITCH: ADJUSTMENT

1. ADJUST PARK/NEUTRAL POSITION SWITCH ASSEMBLY





(a) Loosen the 2 bolts of the switch and set the shift lever to the N position.

(b) Align the groove and neutral basic line.

(c) Hold the switch in this position and tighten the 2 bolts.

Torque : 5.4 Nm (55 kgf-cm, 48 in-lbf)

(d) Perform the inspection Initial Inspection and Diagnostic Overview.