Installation

SUSPENSION: FRONT STABILIZER BAR: INSTALLATION

1. INSTALL FRONT NO. 1 STABILIZER BAR BUSH LH





(a) Install the bush.

HINT
* Install each bush to the inner side of each bush stopper on the stabilizer bar.
* Install each bush with its slit facing the vehicle rear side.

2. REMOVE FRONT NO. 1 STABILIZER BAR BUSH RH

HINT
Use the same procedures described for the LH side.

3. INSTALL FRONT STABILIZER BAR

(a) Install the stabilizer bar to the crossmember.

4. INSTALL FRONT SUSPENSION MEMBER BRACE FRONT LH

(a) Install the member brace with the 4 bolts to the suspension member.

Torque : 87 Nm (887 kgf-cm, 64 ft-lbf)

5. INSTALL FRONT SUSPENSION MEMBER BRACE FRONT RH

HINT
Use the same procedures described for the LH side.

6. INSTALL FRONT STABILIZER LINK ASSEMBLY LH

(a) Install the link with the 2 nuts.

Torque : 74 Nm (755 kgf-cm, 55 ft-lbf)

7. INSTALL FRONT STABILIZER LINK ASSEMBLY RH

HINT
Use the same procedures described for the LH side.

8. INSTALL FRONT WHEEL

Torque : 103 Nm (1,050 kgf-cm, 76 ft-lbf)