Satellite Radio Broadcast Cannot be Selected or After Selecting Broadcast, Broadcast Cannot be Added into Memory

NAVIGATION / MULTI INFO DISPLAY: NAVIGATION SYSTEM (w/ USB Audio System): Satellite Radio Broadcast cannot be Selected or After Selecting Broadcast, Broadcast cannot be Added into Memory
- Satellite Radio Broadcast cannot be Selected or After Selecting Broadcast, Broadcast cannot be Added into Memory

INSPECTION PROCEDURE

NOTICE:
* Some satellite radio broadcasts require payment. A contract must be made between a satellite radio service and the user. If the contract expires, it will not be possible to listen to the broadcast.
* After replacing the stereo component tuner assembly of vehicles subscribed to pay-type satellite radio broadcasts, registration of the XM radio ID is necessary.

PROCEDURE

1. CHECK SATELLITE RADIO

(a) Check the radio condition.

Result





B -- CHECK SATELLITE RADIO

A -- REPLACE STEREO COMPONENT TUNER ASSEMBLY Removal

2. CHECK SATELLITE RADIO

(a) Check the number of preset channels.

OK:

18 channels have already been preset.

NG -- CHECK BATTERY

OK -- END (ONLY 18 CHANNELS CAN BE PRESET)

3. CHECK BATTERY

(a) Check if the battery was replaced.

OK:

Battery was not replaced.

NG -- ADD PRESET CHANNEL INTO MEMORY AGAIN

OK -- REPLACE STEREO COMPONENT TUNER ASSEMBLY Removal

4. ADD PRESET CHANNEL INTO MEMORY AGAIN

(a) Check if the preset channels that have been cleared can be added into memory again.

OK:

Preset channels can be added into memory.

NG -- PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Problem Symptoms Table

OK -- END