Display Does Not Dim when Light Control Switch is Turned ON

NAVIGATION / MULTI INFO DISPLAY: NAVIGATION SYSTEM (w/o USB Audio System): Display does not Dim when Light Control Switch is Turned ON
- Display does not Dim when Light Control Switch is Turned ON

INSPECTION PROCEDURE

PROCEDURE

1. CHECK IMAGE QUALITY SETTING

(a) Enter the display adjustment screen by pressing the "DISP" switch.





(b) Turn the light control switch to the TAIL position.

(c) Check if "Day Mode" on the display is off.

OK:

"Day Mode" is off.

NG -- TURN "DAY MODE" SETTING OFF
OK -- Continue to next step.

2. CHECK VEHICLE SIGNAL (DISPLAY VEHICLE SIGNAL)

(a) Enter the "Display Check" mode and select "Vehicle Signal Check" Operation Check.





(b) Check that the display changes between ON and OFF according to the light control switch operation.

OK:





HINT
The display is updated once per second. It is normal for the display to lag behind the actual switch operation.

NG -- PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Problem Symptoms Table

OK -- REPLACE NAVIGATION RECEIVER ASSEMBLY Removal