Power Mirror Control System (w/o Memory)

MIRROR (EXT): POWER MIRROR CONTROL SYSTEM (w/o Memory): OPERATION CHECK

1. CHECK POWER RETRACTABLE MIRROR (w/ Retract Mirror)

(a) Turn the ignition switch to ACC.

(b) At each position of the outer mirror body, check the retractable mirror operation when operating the retract switch of the outer mirror.

(1) Move the mirrors to the driving position.





(2) Press the retract switch.

(3) Check that the right and left mirrors move from the driving position to the retracted position.

(4) Move the mirrors to the driving position.





(5) Move one of the mirrors to the forward position by hand.

(6) Press the retract switch.

(7) Check that the forward position mirror moves to the retracted position, and check that the driving position mirror moves to the retracted position.

(8) Move the mirrors to the driving position.





(9) Move one of the mirrors to the retracted position by hand.

(10) Press the retract switch.

(11) Check that the driving position mirror moves to the retracted position.

(12) Move the mirrors to the retracted position.





(13) Press the retract switch.

(14) Check that the right and left mirrors move from the retracted position to the driving position.

(15) Move the mirrors to the retracted position.





(16) Move one of the mirrors to the driving position by hand.

(17) Press the retract switch.

(18) Check that the retracted position mirror moves to the driving position, and check that the driving position mirror moves forward beyond the driving position.

(c) Check the operation of the outer mirror body in relation to retract switch operations and ignition switch position changes.

(1) When the mirror body is operating, turn the ignition switch to LOCK and check that the mirror operation stops immediately.

(2) Repeat the step above. This time, turn the ignition switch to ACC and press the mirror retract switch in the opposite direction that the mirror is operating. Check that the mirror operates in the opposite direction.

(d) Check the operation of the outer mirror body when it is restrained by an obstacle.

(1) When the mirror body is moving to the retracted or driving position, restrain the mirror body by hand. Check that the mirror stops moving.

(2) With the mirror body stopped partway, push the retract switch. Check that the mirror body moves in the opposite direction.

2. CHECK MIRROR HEATER

(a) Turn the ignition switch to ON.

(b) Check that pressing the rear defogger switch illuminates the indicator and warms the mirror surface.

(c) Check that after approximately 15 minutes, the indicator light turns off and the mirror heater deactivates.