Installation

HEATING / AIR CONDITIONING: AIR CONDITIONING PRESSURE SENSOR: INSTALLATION

1. INSTALL AIR CONDITIONER PRESSURE SENSOR





(a) Sufficiently apply compressor oil to O-ring and the fitting surface of the pressure sensor.

Compressor oil:

ND-OIL 8 or equivalent

(b) Using a deep socket wrench 27 mm, install the pressure sensor.

Torque : 11 Nm (110 kgf-cm, 8 ft-lbf)

(c) Connect the connector.

2. CHARGE REFRIGERANT Service and Repair

3. WARM UP ENGINE Service and Repair

4. INSPECT FOR REFRIGERANT LEAK Service and Repair