Operation CHARM: Car repair manuals for everyone.
Home >> Toyota >> 2011 >> Sequoia 4WD V8-5.7L (3UR-FBE) Flex Fuel >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Testing and Inspection >> Initial Inspection and Diagnostic Overview >> Check for Intermittent Problems

Check for Intermittent Problems





3UR-FBE ENGINE CONTROL: SFI SYSTEM: CHECK FOR INTERMITTENT PROBLEMS

HINT
Inspect the vehicle's ECM using check mode. Intermittent problems are easier to detect with the Techstream when the ECM is in check mode. In check mode, the ECM uses 1 trip detection logic, which is more sensitive to malfunctions than normal mode (default), which uses 2 trip detection logic.

(a) Clear the DTCs Reading and Clearing Diagnostic Trouble Codes.
(b) Switch the ECM from normal mode to check mode using the Techstream Check Mode Procedure.
(c) Perform a simulation test.
(d) Check and wiggle the harness(es), connector(s) and terminal(s).
pro multis · About Operation CHARM