Installation

3UR-FBE EMISSION CONTROL: AIR INJECTION DRIVER: INSTALLATION

1. INSTALL AIR INJECTION CONTROL DRIVER (for Bank 2)





(a) Install the air injection control driver with the 2 screws.

Torque : 2.0 Nm (20 kgf-cm, 18 in-lbf)

2. INSTALL AIR INJECTION CONTROL DRIVER (for Bank 1)





(a) Install the air injection control driver with the 2 screws.

Torque : 2.0 Nm (20 kgf-cm, 18 in-lbf)

(b) Install the 2 bolts.

Torque : 5.0 Nm (51 kgf-cm, 44 in-lbf)

3. INSTALL AIR INJECTION CONTROL DRIVER ASSEMBLY





(a) Install the air injection control driver with the 3 bolts.

Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)

(b) Connect the 2 wire harness clamps.





(c) Install the ground cable with the bolt.

Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)

(d) Connect the 4 air injection control driver connectors.