Timing Cover

TIMING CHAIN COVER SUB-ASSEMBLY

Align the oil pump drive rotor spline and crankshaft as shown in the illustration. Install the spline and chain cover to the crankshaft.






Temporarily install the timing chain cover with the 28 bolts and nut.






Standard Bolt:






Tighten the 3 bolts in several steps in the sequence shown in the illustration.






Torque 47 Nm (479 kgf-cm, 35 ft-lbf)

Temporarily install the fluid coupling bracket with the 4 bolts.






Standard Bolt:






Temporarily install the belt tensioner with the standard bolt and 6 mm hexagon wrench bolt.






Tighten the 8 bolts labeled 4 to 11 in several steps in the sequence shown in the illustration.






Torque 47 Nm (479 kgf-cm, 35 ft-lbf)

Tighten the 23 bolts and nut labeled 12 to 35 in several steps in the sequence shown in the illustration.






Torque 23 Nm (235 kgf-cm, 17 ft-lbf)