Axle Nut

FRONT AXLE HUB NUT (for 4WD)

Clean the threaded parts on the drive shaft and axle hub nut using a non-residue solvent.

Be sure to perform this work for a new drive shaft.
Keep the threaded parts free of oil and foreign objects.

Using a 39 mm socket wrench, install the hub nut.

Torque 338 Nm (3446 kgf-cm, 249 ft-lbf)

Install the front wheel adjusting lock cap and a new cotter pin.






REAR AXLE SHAFT NUT

Using a 39 mm socket wrench, install the rear axle shaft nut LH.

Torque 340 Nm (3467 kgf-cm, 251 ft-lbf)






Install the adjusting lock cap and new cotter pin.