Installation

POWER ASSIST SYSTEMS: POWER STEERING ECU: INSTALLATION

HINT
A bolt without a torque specification is shown in the standard bolt chart Standard Bolt - Specified Torque For Standard Bolts.

1. INSTALL POWER STEERING ECU ASSEMBLY

(a) Attach the 2 claws to install the power steering ECU assembly.

2. INSTALL ECU INTEGRATION BOX RH Installation

3. INSTALL NO. 2 AIR DUCT SUB-ASSEMBLY Installation

4. INSTALL INSTRUMENT LOWER PANEL SUB-ASSEMBLY Installation

5. INSTALL INSTRUMENT PANEL BOX DOOR COVER Installation

6. INSTALL INSTRUMENT NO. 2 LOWER PANEL AIRBAG ASSEMBLY Installation

7. INSTALL INSTRUMENT LOWER COVER LH Installation

8. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Installation

9. INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH Installation

10. INSTALL COWL SIDE TRIM BOARD RH Installation

11. INSTALL DOOR SCUFF PLATE ASSEMBLY RH Installation

12. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

13. CHECK SRS WARNING LIGHT

(a) Check the SRS warning light Diagnosis System.