Removal

AUDIO / VISUAL: NETWORK GATEWAY ECU: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

2. REMOVE FRONT DOOR SCUFF PLATE RH Removal

3. REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH Removal

4. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Removal

5. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL RH Removal

6. REMOVE NETWORK GATEWAY ECU

(a) Disconnect the connector.





(b) Disengage the 2 claws and remove the ECU aggregation cover.

(c) Remove the network gateway ECU assembly as shown in the illustration.