Installation

THEFT DETERRENT / KEYLESS ENTRY: REMOTE ENGINE STARTER ECU: INSTALLATION

1. INSTALL REMOTE ENGINE STARTER ECU

(a) Install the remote engine starter ECU with the nut.

(b) Connect the connector.

2. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY Installation

3. INSTALL LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY Installation

4. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Installation

5. INSTALL INSTRUMENT SIDE PANEL RH Installation

6. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH Installation

7. INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH

HINT
Use the same procedure for the RH side and LH side Installation.

8. INSTALL FRONT DOOR SCUFF PLATE RH

HINT
Use the same procedure for the RH side and LH side Installation.

9. INSTALL FRONT PANEL GARNISH RH Installation

10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

11. INSPECT SRS WARNING LIGHT

* for Built-in Type Yaw Rate Sensor: Built-in Type Yaw Rate Sensor

* for Separate Type Yaw Rate Sensor: Separate Type Yaw Rate Sensor

12. REGISTRATION

NOTICE:
If the remote engine starter ECU is replaced, refer to Registration Remote Engine Starter System.