Removal
FRONT SUSPENSION: FRONT SUSPENSION MEMBER: REMOVAL
1. REMOVE FRONT FRAME ASSEMBLY
for 2GR-FE: Removal
for 2AR-FE: Removal
2. REMOVE FRONT ENGINE MOUNTING INSULATOR ASSEMBLY (for 2GR-FE)
Removal
3. REMOVE FRONT ENGINE MOUNTING INSULATOR (for 2AR-FE)
Removal
4. REMOVE ENGINE MOUNTING INSULATOR LH
for 2GR-FE: Removal
for 2AR-FE: Removal
5. REMOVE ENGINE MOUNTING INSULATOR RH
for 2GR-FE: Removal
for 2AR-FE: Removal
6. REMOVE FRONT NO. 1 STABILIZER BRACKET LH Removal
7. REMOVE FRONT NO. 1 STABILIZER BRACKET RH
HINT
Perform the same procedure as the LH side.
8. REMOVE FRONT STABILIZER BAR WITH FRONT STABILIZER LINK ASSEMBLY
(a) Remove the front stabilizer bar with 2 front stabilizer link assemblies from the front frame assembly.
9. REMOVE STEERING LINK ASSEMBLY Removal
10. REMOVE FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY LH Removal
11. REMOVE FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY RH
HINT
Perform the same procedure as the LH side.
12. REMOVE FRONT SUSPENSION MEMBER DYNAMIC DAMPER
(a) Remove the 2 bolts and front suspension member dynamic damper from the front frame assembly.
13. REMOVE FRONT SUSPENSION MEMBER BODY MOUNTING FRONT STOPPER
(a) Remove the 2 front suspension member body mounting front stoppers from the front frame assembly.
14. REMOVE FRONT SUSPENSION MEMBER BODY MOUNTING REAR STOPPER
(a) Remove the 2 front suspension member body mounting rear stoppers from the front frame assembly.
15. REMOVE FRONT SUSPENSION MEMBER BODY MOUNTING FRONT CUSHION
(a) Install SST as shown in the illustration.
SST : 09830-10010
09830-01010
09830-01040
09830-01050
SST : 09950-40011
09951-04020
09952-04010
09954-04010
09955-04011
09958-04011
Text in Illustration
(b) Using SST, remove the front suspension member body mounting front cushion from the front frame assembly.
Text in Illustration
NOTICE:
* Make sure that the claws of SST are securely hung onto the mounting cushion.
* Tighten SST slowly and evenly.
* Be careful as the mounting cushion may fly out.
* The mounting cushion cannot be reused.
16. REMOVE FRONT SUSPENSION MEMBER BODY MOUNTING REAR CUSHION LH
(a) Install SST as shown in the illustration.
SST : 09830-10010
09830-01010
09830-01040
09830-01050
SST : 09950-40011
09951-04020
09952-04010
09954-04010
09955-04011
09958-04011
Text in Illustration
(b) Using SST, remove the front suspension member body mounting rear cushion LH from the front frame assembly.
Text in Illustration
NOTICE:
* Make sure that the claws of SST are securely hung onto the mounting cushion.
* Tighten SST slowly and evenly.
* Be careful as the mounting cushion may fly out.
* The mounting cushion cannot be reused.
17. REMOVE FRONT SUSPENSION MEMBER BODY MOUNTING REAR CUSHION RH
HINT
Perform the same procedure as the LH side.
18. REMOVE HOLE PLUG
(a) Remove each hole plug from the front frame assembly.