Disassembly

INTERIOR PANELS / TRIM: FRONT CONSOLE BOX: DISASSEMBLY

1. REMOVE CONSOLE REAR END PANEL SUB-ASSEMBLY

(a) Disengage the 4 claws and 4 clips to remove the console rear end panel sub-assembly.





2. REMOVE REAR CONSOLE ARMREST ASSEMBLY

(a) Using a screwdriver, remove the 2 E-rings.





NOTICE:
Be careful not to allow the E-rings to pop out when removing them.

(b) Using a screwdriver, pull out the 2 box door hinge shafts.





HINT
* Tape the screwdriver tip before use.
* The illustration is for the LH side.
* Use the same procedure for the RH side and LH side.

(c) Remove the rear console armrest assembly.

3. REMOVE CONSOLE COMPARTMENT DOOR LOCK SUB-ASSEMBLY

(a) Remove the 2 screws.





(b) Using a screwdriver, disengage the 8 claws.





HINT
Tape the screwdriver tip before use.

(c) Disengage the 2 guides to remove the console compartment door lock sub-assembly as shown in the illustration.





4. REMOVE CONSOLE COMPARTMENT DOOR CUSHION

(a) Remove the 4 console compartment door cushions from the console compartment door lock sub-assembly.