Disassembly

INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: DISASSEMBLY

1. REMOVE NO. 1 INSTRUMENT PANEL PIN

(a) Remove the 4 screws [C] or [D] and 4 No. 1 instrument panel pins.





2. REMOVE INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY Removal

3. REMOVE NO. 1 HEATER TO REGISTER DUCT

(a) Remove the clip.





(b) Remove the 3 screws [C] or [D] and No. 1 heater to register duct.

4. REMOVE NO. 1 SIDE DEFROSTER NOZZLE DUCT

(a) Remove the screw [C] or [D].





(b) Disengage the 2 claws to remove the No. 1 side defroster nozzle duct.

5. REMOVE NO. 3 HEATER TO REGISTER DUCT

(a) Remove the clip.





(b) Remove the 3 screws [C] or [D] and No. 3 heater to register duct.

6. REMOVE NO. 2 SIDE DEFROSTER NOZZLE DUCT

(a) Remove the screw [C] or [D].





(b) Disengage the 2 claws to remove the No. 2 side defroster nozzle duct.

7. REMOVE ANTENNA CORD SUB-ASSEMBLY Removal

8. REMOVE DEFROSTER NOZZLE ASSEMBLY

(a) Remove the 3 screws [C] or [D].





(b) Disengage the 2 guides to remove the defroster nozzle assembly.

9. REMOVE NAVIGATION ANTENNA ASSEMBLY (w/ Navigation System) Removal

10. REMOVE NO. 2 HEATER TO REGISTER DUCT

(a) Remove the 2 screws [C] or [D] and No. 2 heater to register duct.





11. REMOVE NO. 2 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY

(a) Remove the 2 screws [C] or [D].





(b) Apply protective tape to the areas shown in the illustration.





Text in Illustration





(c) Disengage the 5 clips as shown in the illustration.

(d) Using a moulding remover, disengage the 8 clips to remove the No. 2 instrument panel garnish sub-assembly as shown in the illustration.