Installation

DOOR LOCK: DOOR CONTROL RECEIVER: INSTALLATION

1. INSTALL DOOR CONTROL RECEIVER (w/o Tire Pressure Warning System)

(a) Install the door control receiver with the bolt.

(b) Connect the connector.

2. INSTALL DOOR CONTROL AND TIRE PRESSURE MONITORING SYSTEM RECEIVER ASSEMBLY (w/ Tire Pressure Warning System)

(a) Install the door control and tire pressure monitoring system receiver assembly with the bolt.

(b) Connect the connector.

3. INSTALL ROOF SIDE INNER GARNISH RH

HINT
Use the same procedure for the RH side and LH side Installation.

4. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH Installation

5. INSTALL REAR SIDE SEATBACK ASSEMBLY RH Installation

6. INSTALL REAR SEAT CUSHION LOCK HOOK Installation

7. INSTALL REAR SEAT CUSHION ASSEMBLY Installation

8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

9. REGISTER DOOR CONTROL TRANSMITTER MODULE SET SUB-ASSEMBLY ID (w/o Smart Key System)

HINT
In case of door control receiver or door control and tire pressure monitoring system receiver assembly replacement Registration.

10. REGISTER TRANSMITTER ID (w/ Tire Pressure Warning System)

HINT
In case of door control and tire pressure monitoring system receiver assembly replacement Registration.

11. INSPECT TIRE PRESSURE WARNING SYSTEM (w/ Tire Pressure Warning System)

HINT
In case of door control and tire pressure monitoring system receiver assembly replacement Test Mode Procedure.

12. PERFORM INITIALIZATION (w/ Tire Pressure Warning System)

HINT
In case of door control and tire pressure monitoring system receiver assembly replacement Initialization.

13. INSPECT SRS WARNING LIGHT

* for Built-in Type Yaw Rate Sensor: Built-in Type Yaw Rate Sensor

* for Separate Type Yaw Rate Sensor: Separate Type Yaw Rate Sensor