Disassembly

SEAT: FRONT SEAT ASSEMBLY (for TMMK Made Power Seat): DISASSEMBLY

1. REMOVE SEAT ADJUSTER COVER CAP

(a) Remove the 2 seat adjuster cover caps.

2. REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB

(a) Using a moulding remover, disengage the 4 claws to remove the slide and vertical power seat switch knob.

3. REMOVE RECLINING POWER SEAT SWITCH KNOB

(a) Using a moulding remover, disengage the 4 claws to remove the reclining power seat switch knob.

4. DISCONNECT SEPARATE TYPE FRONT SEATBACK COVER

(a) Disconnect the 2 rubber bands of the separate type front seatback cover.

5. REMOVE FRONT SEAT CUSHION SHIELD

(a) Remove the screw.

(b) Disengage the 2 claws to remove the front seat cushion shield.

(c) Disengage the wire harness clamp.

(d) Disconnect the front power seat switch connector.

(e) for Driver Side:

(1) Disengage 4 claws to remove the front lumbar power seat switch from the front seat cushion shield.

6. REMOVE FRONT POWER SEAT SWITCH Removal

7. REMOVE FRONT LUMBAR POWER SEAT SWITCH (for Driver Side) Removal

8. REMOVE FRONT SEAT INNER CUSHION SHIELD

(a) Remove the 2 screws and front seat inner cushion shield.

9. REMOVE FRONT SEAT INNER BELT ASSEMBLY (for Driver Side) Removal

10. REMOVE FRONT SEAT INNER BELT ASSEMBLY (for Front Passenger Side) Removal

11. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD

(a) Disconnect the connector (A).

(b) Disengage the clamp (B).

(c) Disengage the claw (D) and 3 clamps (C) to separate the front seat airbag assembly wire harness.

(d) w/ Seat Heater System:

(1) Disconnect the connector (E).

(2) Disengage the clamp (F).

(e) for Driver Side:

(1) Separate the separate type front seat cushion cover.

(f) for Front Passenger Side:

(1) Separate the separate type front seat cushion cover.

(g) Disengage the 4 hooks.

(h) Disengage each hook and remove the separate type front seat cushion cover with pad.

12. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER

(a) Remove the 12 hog rings and the separate type front seat cushion cover from the separate type front seat cushion pad.

13. REMOVE FRONT SEAT CUSHION HEATER ASSEMBLY (w/ Seat Heater System) Removal

14. REMOVE SEPARATE TYPE FRONT SEATBACK COVER WITH PAD

(a) Disengage the hook.

(b) Disengage the 2 fasteners.

(d) Disengage the 2 hooks.

(1) Remove the 4 clips.

(2) Slide each hook to disengage them.

(e) Disengage the 4 claws and remove the 2 front seat headrest supports.

(f) Remove the separate type front seatback cover with pad.

15. REMOVE FRONT SEAT AIRBAG ASSEMBLY Removal

16. REMOVE SEPARATE TYPE FRONT SEATBACK COVER

(a) Remove the 2 hog rings.

(b) Disengage the 2 fasteners to remove the separate type front seatback cover from the separate type front seatback pad.

17. REMOVE FRONT SEATBACK HEATER ASSEMBLY (w/ Seat Heater System) Removal

18. REMOVE FRONT SEAT LOWER CUSHION SHIELD LH (for Driver Side)

(a) Remove the screw.

(b) Disengage the hook as shown in the illustration.

(c) Disengage the 2 claws to remove the front seat lower cushion shield LH.

19. REMOVE FRONT SEAT LOWER CUSHION SHIELD RH (for Driver Side)

(a) Remove the screw.

(b) Disengage the hook as shown in the illustration.

(c) Disengage the 2 claws to remove the front seat lower cushion shield RH.

20. REMOVE FRONT SEAT LOWER CUSHION SHIELD LH (for Front Passenger Side)

(a) Disengage the 2 claws to remove the front seat lower cushion shield LH.

21. REMOVE FRONT SEAT LOWER CUSHION SHIELD RH (for Front Passenger Side)

(a) Disengage the 2 claws to remove the front seat lower cushion shield RH.

22. REMOVE SEAT HEATER CONTROL SUB-ASSEMBLY (w/ Seat Heater System)

(a) Disconnect the connector.

(b) Disengage the clamp and remove the seat heater control sub-assembly.

23. REMOVE OCCUPANT DETECTION ECU (for Front Passenger Side) Removal

24. REMOVE FRONT SEAT WIRE

(a) Disconnect the connectors and disengage the wire harness clamps to remove the front seat wire.

25. REMOVE FRONT NO. 2 SEAT WIRE

(a) Disconnect the connectors and disengage the wire harness clamps to remove the front No. 2 seat wire.

26. REMOVE FRONT UPPER SEAT TRACK COVER LH

(a) Disengage the 2 claws to remove the front upper seat track cover LH.

27. REMOVE FRONT UPPER SEAT TRACK COVER RH

(a) Disengage the 2 claws to remove the front upper seat track cover RH.

28. REMOVE REAR UPPER SEAT TRACK COVER LH (for Front Passenger Side)

(a) Disengage the 2 claws to remove the rear upper seat track cover LH.

29. REMOVE REAR UPPER SEAT TRACK COVER RH (for Front Passenger Side)

(a) Disengage the 2 claws to remove the rear upper seat track cover RH.

30. REMOVE FRONT SEAT CUSHION PANEL SUB-ASSEMBLY (for Driver Side)

(a) Remove the 4 bolts and front seat cushion panel sub-assembly.

31. REMOVE FRONT SEATBACK FRAME SUB-ASSEMBLY

(a) Remove the 4 bolts and the front seatback frame sub-assembly.

32. REMOVE LUMBAR SUPPORT ADJUSTER ASSEMBLY (for Driver Side) Removal

33. REMOVE SEPARATE TYPE FRONT SEATBACK SPRING ASSEMBLY (for Front Passenger Side)

(a) Disengage the 4 claws.

(b) Disengage the 2 guides to remove the separate type front seatback spring assembly.

(c) Remove the 2 front seatback hooks from the separate type front seatback spring assembly.

34. REMOVE SEPARATE TYPE FRONT SEAT CUSHION SPRING ASSEMBLY

(a) Remove the separate type front seat cushion spring assembly.