Installation

METER / GAUGE / DISPLAY: COMBINATION METER: INSTALLATION

1. INSTALL COMBINATION METER ASSEMBLY

(a) Connect the 2 connectors.

(b) Engage the wire harness clamp.

(c) Install the combination meter assembly with the 4 screws.

2. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY Installation

3. INSTALL NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY Installation

4. INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH Installation

5. INSTALL INSTRUMENT SIDE PANEL LH Installation

6. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH Installation

7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.