Installation

DOOR LOCK: UNLOCK WARNING SWITCH: INSTALLATION

1. INSTALL UNLOCK WARNING SWITCH ASSEMBLY

(a) Engage the 2 claws and install the unlock warning switch assembly to the steering column upper bracket.

(b) Connect the connector.

2. ALIGN FRONT WHEELS FACING STRAIGHT AHEAD

3. INSPECT STEERING WHEEL CENTER POINT

4. INSTALL IGNITION SWITCH LOCK CYLINDER ASSEMBLY Reassembly

5. INSTALL TRANSPONDER KEY AMPLIFIER Installation

6. INSTALL UPPER STEERING COLUMN COVER Installation

7. INSTALL LOWER STEERING COLUMN COVER Installation

8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.