Reassembly

LIGHTING (EXT): REAR COMBINATION LIGHT ASSEMBLY: REASSEMBLY

1. INSTALL REAR BUMPER UPPER SIDE RETAINER

(a) Engage the claw to install the rear bumper upper side retainer as shown in the illustration.





2. INSTALL TAIL AND STOP LIGHT BULB

(a) Install the tail and stop light bulb to the tail and stop light socket.

(b) Turn the tail and stop light socket with the tail and stop light bulb in the direction indicated by the arrow shown in the illustration to install them as a unit.





3. INSTALL REAR TURN SIGNAL LIGHT BULB

(a) Install the rear turn signal light bulb to the rear turn signal light socket.

(b) Turn the rear turn signal light socket with the rear turn signal light bulb in the direction indicated by the arrow shown in the illustration to install them as a unit.





4. INSTALL REAR SIDE MARKER LIGHT BULB

(a) Install the rear side marker light bulb to the rear side marker light socket.

(b) Turn the rear side marker light socket with the rear side marker light bulb in the direction indicated by the arrow shown in the illustration to install them as a unit.





5. INSTALL REAR COMBINATION LIGHT PACKING

(a) Install a new rear combination light packing.