Removal

2AR-FE ENGINE CONTROL: ENGINE COOLANT TEMPERATURE SENSOR: REMOVAL

1. REMOVE FRONT WHEEL OPENING EXTENSION PAD RH

2. REMOVE FRONT WHEEL OPENING EXTENSION PAD LH

3. REMOVE ENGINE UNDER COVER LH

4. REMOVE ENGINE UNDER COVER RH

5. DRAIN ENGINE COOLANT Service and Repair

6. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY Removal

7. REMOVE COOL AIR INTAKE DUCT SEAL Removal

8. REMOVE INLET AIR CLEANER ASSEMBLY Removal

9. REMOVE ENGINE COOLANT TEMPERATURE SENSOR

(a) Disconnect the engine coolant temperature sensor connector.





(b) Remove the 2 bolts and disconnect the wire harness.





(c) Using a 19 mm ball joint lock nut wrench, remove the engine coolant temperature sensor.





Text in Illustration





(d) Remove the gasket from the engine coolant temperature sensor.