Installation

2AR-FE ENGINE CONTROL: ACCELERATOR PEDAL: INSTALLATION

1. INSTALL ACCELERATOR PEDAL SENSOR ASSEMBLY

NOTICE:
* Avoid physical shock to the accelerator pedal assembly.
* Do not disassemble the accelerator pedal assembly.

(a) Temporarily install the accelerator pedal sensor assembly with the 2 bolts.

(b) Tighten the 2 bolts in the order shown in the illustration.





Torque : 5.4 Nm (55 kgf-cm, 48 in-lbf)

(c) Connect the accelerator pedal connector.