Installation

POWER ASSIST SYSTEMS: POWER STEERING ECU (w/o Wireless Door Lock System): INSTALLATION

1. INSTALL POWER STEERING ECU ASSEMBLY

(a) Install the power steering ECU assembly to the steering column assembly with the 2 bolts.

Torque : 19 Nm (189 kgf-cm, 14 ft-lbf)

(b) Connect the 4 connectors to the power steering ECU assembly.

2. INSTALL STEERING COLUMN ASSEMBLY

Installation

3. TORQUE SENSOR ZERO POINT CALIBRATION

2AR-FE without Wireless Door Lock

4. ASSIST MAP WRITING

2AR-FE without Wireless Door Lock