Conditions When Inspection of SRS Parts Is Necessary

Repairs and Inspections Required After a Collision

CONDITIONS WHEN INSPECTION OF SRS PARTS IS NECESSARY

(a) When the vehicle is damaged in a collision even when the SRS parts are not deployed.

(b) When an SRS system DTC is output.

Perform zero point calibration and sensitivity check if any of the following conditions occur:

* The occupant detection ECU is replaced.

* Accessories (seatback tray and seat cover, etc.) are installed.

* The front passenger seat is removed from the vehicle.

* One of the bolts that is used to install the front passenger seat is removed and reinstalled.

* The passenger airbag ON/OFF indicator ("OFF") comes on when the front passenger seat is not occupied.

* The vehicle is brought to the workshop for repair due to an accident or a collision.