Shift Lever

U760E AUTOMATIC TRANSMISSION / TRANSAXLE: SHIFT LEVER: INSPECTION

1. INSPECT LOWER SHIFT LEVER ASSEMBLY (w/o Smart Key System)

(a) Measure the voltage according to the value(s) in the table below.





Standard Voltage:





Text in Illustration





HINT
Do not disconnect the lower shift lever assembly connector.

(b) Measure the resistance according to the value(s) in the table below.





Standard Resistance:





Text in Illustration





HINT
Do not disconnect the lower shift lever assembly connector.

(c) Inspect shift lock solenoid

(1) Disconnect the shift lock solenoid connector.





(2) Measure the resistance according to the value(s) in the table below when the shift lever is moved to each position.





Standard Resistance:





Text in Illustration





* If the result is not as specified, replace the lower shift lever assembly.

* If the shift lock does not operate when the power source of the lower shift lever assembly is normal and the resistance between the body ground and the shift lock solenoid is as specified, replace the lower shift lever assembly.

(3) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





* If the result is not as specified, replace the lower shift lever assembly.

* If the shift lock does not operate when the power source of the lower shift lever assembly is normal and the resistance between the body ground and the shift lock solenoid is as specified, replace the lower shift lever assembly.

2. INSPECT LOWER SHIFT LEVER ASSEMBLY (w/ Smart Key System)

(a) Measure the voltage according to the value(s) in the table below.





Standard Voltage:





Text in Illustration





HINT
Do not disconnect the lower shift lever assembly connector.

(b) Measure the resistance according to the value(s) in the table below.





Standard Resistance:





Text in Illustration





HINT
Do not disconnect the lower shift lever assembly connector.

(c) Inspect shift lock solenoid

(1) Disconnect the shift lock solenoid connector.





(2) Measure the resistance according to the value(s) in the table below when the shift lever is moved to each position.





Standard Resistance:





Text in Illustration





* If the result is not as specified, replace the lower shift lever assembly.

* If the shift lock does not operate when the power source of the lower shift lever assembly is normal and the resistance between the body ground and the shift lock solenoid is as specified, replace the lower shift lever assembly.

(3) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





* If the result is not as specified, replace the lower shift lever assembly.

* If the shift lock does not operate when the power source of the lower shift lever assembly is normal and the resistance between the body ground and the shift lock solenoid is as specified, replace the lower shift lever assembly.

3. INSPECT TRANSMISSION CONTROL SWITCH

(a) Measure the resistance between each terminal of the shift lock control unit assembly when the shift lever is moved to each position.





Standard Resistance:





Text in Illustration





If the resistance value is not as specified, replace the lower shift lever assembly.