Rear Door Reassembly

1. Install NEW rear door inner glass weatherstrip.





2. Install rear door trim board sub-assembly. Figure 25.

A. Install the No. 1 door scuff plate clamp.

B. Connect the rear door lock remote control cable assembly and rear door inside locking cable assembly.





C. Engage the rear door trim board sub-assembly with the 4 claws and reference boss.





D. Engage the 8 clips and install the rear door trim board sub-assembly.

E. Install the 3 screws.

F. If protective tape has been applied, remove it.

3. Remainder of reassembly is reverse of disassembly.

4. Confirm condition if improved.