Installation

DOOR LOCK: DOOR CONTROL RECEIVER: INSTALLATION

1. INSTALL DOOR CONTROL RECEIVER (w/o Tire Pressure Warning System)

(a) Install the door control receiver with the bolt.

(b) Connect the connector.

2. INSTALL DOOR CONTROL AND TIRE PRESSURE MONITORING SYSTEM RECEIVER ASSEMBLY (w/ Tire Pressure Warning System)

(a) Install the door control and tire pressure monitoring system receiver assembly with the bolt.

(b) Connect the connector.

3. INSTALL ROOF SIDE INNER GARNISH RH

HINT
Use the same procedure for the RH side and LH side Installation.

4. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH Installation

5. INSTALL REAR SIDE SEATBACK ASSEMBLY RH Installation

6. INSTALL REAR SEAT CUSHION LOCK HOOK Installation

7. INSTALL REAR SEAT CUSHION ASSEMBLY Installation

8. CONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

9. INSTALL LUGGAGE TRIM SERVICE HOLE COVER Installation

10. REGISTER TRANSMITTER ID (w/ Tire Pressure Warning System)

Registration

11. INSPECT TIRE PRESSURE WARNING SYSTEM (w/ Tire Pressure Warning System)

Test Mode Procedure

12. PERFORM INITIALIZATION (w/ Tire Pressure Warning System)

Initialization

13. INSPECT SRS WARNING LIGHT

* for Built-in Type Yaw Rate Sensor: Built-in Type Yaw Rate Sensor

* for Separate Type Yaw Rate Sensor: Separate Type Yaw Rate Sensor