Operation CHARM: Car repair manuals for everyone.
Home >> Toyota >> 2012 >> Camry L4-2.5L (2AR-FXE) Hybrid >> Repair and Diagnosis >> Powertrain Management >> Ignition System >> Knock Sensor >> Service and Repair >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation





2AR-FXE ENGINE CONTROL: KNOCK SENSOR: INSTALLATION

1. INSTALL KNOCK CONTROL SENSOR

(a) Install the sensor with the bolt so that the sensor is angled as shown in the illustration.





Torque : 20 Nm (204 kgf-cm, 15 ft-lbf)

Text in Illustration





NOTICE:
The acceptable installation angle of the sensor is between 7° upward and 10° downward from the horizontal position.

HINT
Perform "Inspection After Repair" after replacing the knock control sensor Programming and Relearning

(b) Connect the sensor connector.

2. INSTALL INTAKE MANIFOLD

Installation
pro multis · About Operation CHARM