Removal

2GR-FE ENGINE CONTROL: AIR FUEL RATIO SENSOR: REMOVAL

1. REMOVE COOL AIR INTAKE DUCT SEAL Removal

2. REMOVE V-BANK COVER SUB-ASSEMBLY Removal

3. REMOVE AIR FUEL RATIO SENSOR (for Bank 2 Sensor 1)

(a) Disconnect the air fuel ratio sensor connector.





(b) Separate the wire harness clamp.





(c) Using SST, remove the air fuel ratio sensor from the exhaust manifold LH.





SST : 09224-00010

4. REMOVE FRONT EXHAUST PIPE ASSEMBLY

Removal.

5. REMOVE AIR FUEL RATIO SENSOR (for Bank 1 Sensor 1)

(a) Disconnect the air fuel ratio sensor connector.





(b) Disconnect the harness clamp.

(c) Using SST, remove the air fuel ratio sensor from the exhaust manifold RH.





SST : 09224-00010