Operation CHARM: Car repair manuals for everyone.
Home >> Toyota >> 2012 >> FJ Cruiser 2WD V6-4.0L (1GR-FE) >> Repair and Diagnosis >> Body and Frame >> Interior Moulding / Trim >> Dashboard / Instrument Panel >> Service and Repair >> Installation

Installation





INSTRUMENT PANEL: INSTRUMENT PANEL ASSEMBLY: INSTALLATION

1. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY RH

(a) Engage the 2 clips and install the lower instrument panel.





2. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY LH

HINT
Use the same procedure as for the RH side.

3. INSTALL ACCESSORY METER BRACKET

(a) Install the accessory meter bracket with the 2 clips.





4. INSTALL INSTRUMENT PANEL CENTER BRACKET SUB-ASSEMBLY

(a) Install the instrument panel center bracket with the 2 [B] screws.





5. INSTALL FRONT PASSENGER AIRBAG ASSEMBLY Installation

6. INSTALL NO. 2 INSTRUMENT PANEL WIRE

(a) Engage the 16 clamps and install the instrument panel wire.





7. INSTALL NO. 3 HEATER TO REGISTER DUCT

(a) Install the heater to register duct with the 2 [B] screws.





8. INSTALL DEFROSTER NOZZLE ASSEMBLY

(a) Engage the 9 claws and install the defroster nozzle.





(b) Install the 5 [B] screws.

9. INSTALL NO. 1 SIDE DEFROSTER NOZZLE DUCT

(a) Engage the 2 claws and install the side defroster nozzle duct.





(b) Install screw [B].

10. INSTALL NO. 2 SIDE DEFROSTER NOZZLE DUCT

(a) Engage the 2 claws and install the side defroster nozzle duct.





(b) Install screw [B].

11. INSTALL INSTRUMENT CLUSTER LOWER CENTER FINISH PANEL SUB-ASSEMBLY

(a) Engage the 2 clips and 3 claws and install the instrument cluster lower center finish panel.





(b) Install the 3 [B] screws.

12. INSTALL INSTRUMENT CLUSTER CENTER FINISH PANEL SUB-ASSEMBLY

(a) Engage the 4 claws and install the instrument cluster center finish panel.





(b) Install the 2 [B] screws.

13. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

(a) Engage the 2 clips and 2 claws and install the instrument cluster finish panel.





(b) Install the 3 [B] screws.

14. INSTALL GLOVE COMPARTMENT DOOR STOPPER SUB-ASSEMBLY

(a) Engage the claw and install the glove compartment door stopper.





15. INSTALL NO. 2 INSTRUMENT PANEL BOX DOOR SUB-ASSEMBLY

(a) Engage the 4 clips and 2 claws and install the instrument panel box door.





(b) Install the 2 [H] screws.

16. INSTALL ACCESSORY METER ASSEMBLY

(a) Install the accessory meter with the 2 nuts.





17. INSTALL METER COVER

(a) Engage the 6 clips and install the meter cover.





18. INSTALL INSTRUMENT PANEL SUB-ASSEMBLY





(a) Install the lower instrument panel with the 2 [C] bolts, 2 [E] bolts, 7 [F] bolts and nut [G].

Torque : 20 Nm (205 kgf-cm, 15 ft-lbf) for bolt C

(b) Engage the clamps and connect the connectors.

19. CONNECT PASSENGER AIRBAG CONNECTOR





(a) Connect the passenger airbag connector.

20. INSTALL INSTRUMENT PANEL FINISH PANEL END LH

(a) Engage the 3 claws and install the instrument panel finish panel end.





21. INSTALL ASSIST GRIP RETAINER RH

(a) Install the assist grip retainer with the 2 bolts.





Torque : 29 Nm (296 kgf-cm, 21 ft-lbf)

22. INSTALL ASSIST GRIP RETAINER LH

HINT
Use the same procedure as for the RH side.

23. INSTALL FRONT NO. 2 SPEAKER ASSEMBLY Installation

24. INSTALL NO. 2 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY

(a) Engage the 4 clips and claw and install the instrument panel speaker panel.





25. INSTALL NO. 1 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY

HINT
Use the same procedure as for the RH side.

26. INSTALL NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY

(a) Engage the 4 clips and 2 claws and install the instrument panel register.





(b) Install the bolt [F] and clip.

(c) Engage the 2 claws and install the instrument panel hole cover.





27. INSTALL INSTRUMENT PANEL LOWER FINISH PANEL SUB-ASSEMBLY RH

(a) Install the connectors to the instrument panel lower finish panel.





(b) Engage the claw and 2 clips and install the instrument panel lower finish panel.

(c) Install screw [A].

28. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY

(a) Install the glove compartment door assembly with the 3 hinges while holding it horizontal.





(b) Slightly flex the upper part of the glove compartment door assembly, and install the glove compartment door assembly.





(c) Install the glove compartment door stoppers onto the glove compartment door.

29. INSTALL COMBINATION METER ASSEMBLY

(a) Connect the 2 connectors and the clamp.





(b) Install the combination meter assembly with the 4 screws.





Torque : 7.0 Nm (71 kgf-cm, 62 in-lbf)

30. INSTALL INSTRUMENT CLUSTER FINISH PANEL





(a) Connect the connectors.

(b) Engage the 3 clips and 4 claws and install the instrument cluster lower finish panel.

31. INSTALL LOWER INSTRUMENT PANEL LH

(a) Install the lower instrument panel with the 4 [F] bolts.





32. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH

(a) Engage the 5 clips and claw and install the lower instrument panel finish panel.





(b) Connect the connector.

(c) Install the 2 [F] bolts.

33. INSTALL INSTRUMENT PANEL FINISH PLATE Installation

34. CONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY

(a) Engage the 3 claws and install the hood lock control lever.





35. INSTALL NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY

(a) Engage the 4 clips and 2 claws and install the instrument panel register.





36. INSTALL INSTRUMENT LOWER COVER SUB-ASSEMBLY

(a) Engage the 3 clips and 2 claws and install the instrument lower cover.





(b) Install the 2 [F] bolts and 2 clips.

37. INSTALL CONSOLE UPPER PANEL NO. 1 GARNISH





(a) Slide the console upper panel garnish toward the front of the vehicle and engage claw B.

(b) Engage the claw and clip and install the console upper panel garnish.

38. INSTALL FRONT CONSOLE BOX

(a) Engage the 5 claws and install the front console box.





(b) Install the 4 [D] screws.

39. INSTALL BOX BOTTOM MAT

(a) Install the box bottom mat.





40. INSTALL CONSOLE UPPER REAR PANEL SUB-ASSEMBLY

(a) Engage the 3 claws and 5 clips and install the console upper rear panel.





41. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for 4WD)

(a) Install the shift lever knob.





42. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transmission)

(a) Install the shift lever knob.





43. INSTALL PARKING BRAKE HOLE COVER SUB-ASSEMBLY





(a) Slide the parking brake hole cover toward the rear of the vehicle and engage the 2 C claws.

(b) Engage the 4 claws and install the parking brake hole cover.

44. INSTALL RADIO RECEIVER ASSEMBLY Installation

45. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY





(a) Connect the 3 connectors.

(b) Engage the 4 clips and install the integration control panel assembly.

(c) Install the 2 [H] screws.

46. INSTALL INSTRUMENT PANEL GARNISH LH

(a) Engage the 3 clips and install the instrument panel garnish.





(b) Install 2 [H] screws.

47. INSTALL INSTRUMENT PANEL GARNISH RH

(a) Engage the 3 clips and install the instrument panel garnish.





(b) Install screw [H].

48. INSTALL FRONT PILLAR GARNISH RH Installation

49. INSTALL FRONT PILLAR GARNISH LH Installation

50. INSTALL ASSIST GRIP ASSEMBLY Installation

51. INSTALL ASSIST GRIP PLUG Installation

52. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH

(a) Install the front door opening trim weatherstrip.

53. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH

(a) Install the front door opening trim weatherstrip.

54. INSTALL COWL SIDE TRIM BOARD RH Installation

55. INSTALL COWL SIDE TRIM BOARD LH Installation

56. INSTALL FOOTREST CLIP Installation

57. INSTALL FRONT FLOOR FOOTREST Installation

58. INSTALL FRONT DOOR SCUFF PLATE RH Installation

59. INSTALL FRONT DOOR SCUFF PLATE LH Installation

60. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque : 3.9 Nm (40 kgf-cm, 35 in-lbf)

61. INSPECT SRS WARNING LIGHT

Diagnosis System
pro multis · About Operation CHARM