Installation

LIGHTING: ROOM LIGHT ASSEMBLY (for Rear): INSTALLATION

1. INSTALL REAR ROOM LIGHT ASSEMBLY

(a) Install room light bulb No. 1.

(b) Engage the 4 claws and install the room light switch base.





(c) Install the roof wire into the claw of the room light.

(d) Engage the 4 claws and install the room light.





(e) Engage the 4 claws and install the room light lens.





2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque : 3.9 Nm (40 kgf-cm, 35 in-lbf)