Operation CHARM: Car repair manuals for everyone.
Home >> Toyota >> 2012 >> FJ Cruiser 4WD V6-4.0L (1GR-FE) >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Power Steering Pressure Switch >> Service and Repair >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la
If it fails: lemon-manuals.org.ua

Or, hide this message: temporarily or permanently

Installation





1GR-FE ENGINE CONTROL SYSTEM: POWER STEERING OIL PRESSURE SWITCH: INSTALLATION

1. INSTALL POWER STEERING OIL PRESSURE SWITCH

(a) Install a new O-ring to the power steering oil pressure switch.

(b) Apply a light coat of engine oil to the O-ring of the power steering oil pressure switch.





Text in Illustration





(c) Using a 24 mm deep socket wrench, install the power steering oil pressure switch.

Torque : 21 Nm (214 kgf-cm, 15 ft-lbf)

NOTICE:
* Do not allow foreign matter to contact the oil seal face of the power steering oil pressure switch (connecting surface with pressure feed tube).
* Be careful not to damage the O-ring when installing the power steering oil pressure switch

(d) Connect the power steering oil pressure switch connector.

2. ADD POWER STEERING FLUID

3. INSPECT FOR POWER STEERING FLUID LEAK

4. BLEED POWER STEERING FLUID Power Steering System
pro multis · About Operation CHARM