Part 2

INTERIOR: ROOF HEADLINING: INSTALLATION - (Continued)

41. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH

(a) Engage the 4 clips and 7 claws to install the deck trim side panel LH.

(b) Install the clip and 3 bolts.





42. CONNECT REAR NO. 1 SEAT OUTER BELT ASSEMBLY LH Installation

43. INSTALL FRONT DECK SIDE TRIM COVER LH

(a) Engage the 4 claws and install the 2 front deck side trim covers LH.





44. INSTALL NO. 2 DECK SIDE TRIM HOOK

(a) Install the No. 2 deck side trim hook with the screw.





45. INSTALL ROPE HOOK ASSEMBLY (for LH Side)

(a) for Front Side:





(1) Install the rope hook assembly with the bolt.

Torque : 6.5 Nm (66 kgf-cm, 58 in-lbf)

(2) Engage the 2 claws.

(b) for Rear Side:





(1) Install the rope hook assembly with the bolt.

Torque : 6.5 Nm (66 kgf-cm, 58 in-lbf)

(2) Engage the 2 claws.

46. INSTALL RECLINING REMOTE CONTROL LEVER BEZEL LH

(a) Engage the 5 claws and install the reclining remote control bezel lever LH.





47. INSTALL REAR POWER OUTLET SOCKET COVER Installation

48. INSTALL REAR POWER POINT SOCKET ASSEMBLY Installation

49. INSTALL REAR COMBINATION LIGHT SERVICE COVER LH





(a) Engage the 2 guides and 6 claws, and install the rear combination light service cover LH.

50. INSTALL SIDE TRIM COVER LH (w/o Rear Seat Entertainment System)

(a) Engage the 10 claws and install the side trim cover LH.





51. INSTALL POWER OUTLET SOCKET BEZEL (w/ Rear Seat Entertainment System)

(a) Connect each connector.





(b) Engage the 4 claws and install the power outlet socket bezel.





52. INSTALL DECK SIDE TRIM LH

(a) Engage the 3 guides and 4 claws as shown in the illustration.





(b) Install the deck side trim LH with the bolt.





53. INSTALL DECK SIDE TRIM COVER LH

(a) Engage the 2 claws and install the deck side trim cover LH.





54. INSTALL ROOF SIDE INNER GARNISH ASSEMBLY RH

HINT
Use the same procedure for the RH side and the LH side.

55. INSTALL QUARTER PILLAR GARNISH RH

HINT
Use the same procedure for the RH side and the LH side.

56. INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH

(a) Engage the 4 clips and 7 claws to install the deck trim side panel RH.

(b) Install the clip and 3 bolts.





57. CONNECT REAR NO. 1 SEAT OUTER BELT ASSEMBLY RH

HINT
Use the same procedure for the RH side and the LH side.

58. INSTALL FRONT DECK SIDE TRIM COVER RH

HINT
Use the same procedure for the RH side and the LH side.

59. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

HINT
Use the same procedure for the No. 1 luggage compartment trim hook and the No. 2 deck side trim hook.

60. INSTALL ROPE HOOK ASSEMBLY (for RH Side)

HINT
Use the same procedure for the RH side and the LH side.

61. INSTALL REAR COMBINATION LIGHT SERVICE COVER RH

(a) Engage the 2 guides and 6 claws, and install the rear combination light service cover RH.





62. INSTALL REAR ROOM TEMPERATURE SENSOR (for Automatic Air Conditioning System) Installation

63. INSTALL SIDE TRIM COVER RH (for Manual Air Conditioning System)

(a) Engage the 4 claws, and install the side trim cover RH.





64. INSTALL DECK SIDE TRIM RH

HINT
Use the same procedure for the RH side and the LH side.

65. INSTALL DECK SIDE TRIM COVER RH

HINT
Use the same procedure for the RH side and the LH side.

66. INSTALL REAR SEAT SIDE GARNISH CAP

(a) Engage the guide and the 6 claws.





(b) Install the rear seat side garnish cap with the screw.

67. INSTALL REAR FLOOR FINISH PLATE

(a) Engage the 4 clips and the 4 claws, and install the rear floor finish plate.





68. INSTALL REAR NO. 2 SEAT ASSEMBLY Installation

69. INSTALL CENTER SEAT CUSHION COVER SUB-ASSEMBLY Installation

70. CONNECT REAR NO. 2 SEAT OUTER BELT ASSEMBLY RH Installation

71. CONNECT REAR NO. 2 SEAT OUTER BELT ASSEMBLY LH Installation

72. INSTALL REAR DECK FLOOR BOX





(a) Engage the 4 guides to install the rear deck floor box.

(b) Install the bolt and nut.

73. INSTALL REAR MAT

(a) Install the rear mat.





74. INSTALL DECK SIDE TRIM BOX RH





(a) Install the deck side trim box RH with the 3 clips.

75. INSTALL JACK CARRIER ASSEMBLY

(a) Engage the 3 claws, and install the jack carrier assembly.





76. INSTALL JACK ASSEMBLY

(a) Install the jack assembly.





77. INSTALL JACK CARRIER CUSHION

(a) Install the jack carrier cushion.





78. INSTALL JACK CARRIER SUPPORT

(a) Install the jack carrier support.

79. INSTALL NO. 1 DECK BOARD





(a) Engage the 3 claws to install the No. 1 deck board.

80. INSTALL NO. 2 DECK BOARD





(a) Engage the 3 claws to install the No. 2 deck board.

81. INSTALL NO. 2 DECK BOARD SUB-ASSEMBLY

(a) Engage the 2 guides and 2 clips to install the No. 2 deck board sub-assembly.





82. INSTALL CENTER PILLAR GARNISH LH

(a) Engage the 2 guides and the clip.





(b) Install the center pillar garnish LH with the clip and screw.

83. CONNECT FRONT SEAT OUTER BELT ASSEMBLY LH Installation