Removal

2ZR-FXE ENGINE CONTROL: THROTTLE BODY: REMOVAL

1. REMOVE NO. 1 ENGINE UNDER COVER

2. DRAIN ENGINE COOLANT (for Engine) Coolant (for Engine)

3. REMOVE NO. 2 CYLINDER HEAD COVER Removal

4. REMOVE AIR CLEANER CAP SUB-ASSEMBLY

(a) Disconnect the mass air flow meter connector.





(b) Release the 2 clamps.





(c) Loosen the hose clamp and remove the air cleaner cap.

5. REMOVE INLET AIR CLEANER ASSEMBLY

(a) Remove the 2 bolts and inlet air cleaner assembly.





6. REMOVE AIR CLEANER CASE

(a) Remove the air cleaner filter element.

(b) Separate the hose from the 3 hose clamps.





(c) Remove the 3 bolts and air cleaner case.

7. REMOVE AIR CLEANER HOSE ASSEMBLY

(a) Loosen the hose clamp and separate the ventilation hose.





(b) Unlock the hose clamp and remove the air cleaner hose assembly.

8. REMOVE THROTTLE BODY ASSEMBLY

(a) Disconnect the throttle body connector and the 2 water by-pass hoses.





(b) Remove the 2 bolts, 2 nuts and throttle body assembly.

(c) Remove the gasket from the intake manifold.