Installation

DOOR LOCK: DOOR CONTROL RECEIVER: INSTALLATION

1. INSTALL DOOR CONTROL RECEIVER

(a) Install the door control receiver with the bolt.

Torque : 7.5 Nm (77 kgf-cm, 66 in-lbf)

(b) Connect the connector.

2. INSTALL ROOF SIDE INNER GARNISH ASSEMBLY RH

HINT
Use the same procedure for the RH side and LH side Installation.

3. INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH Installation

4. INSTALL TONNEAU COVER HOLDER CAP

HINT
Use the same procedure for the RH side and LH side Installation.

5. INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY

HINT
Use the same procedure for the RH side and LH side Installation.

6. INSTALL REAR DECK TRIM COVER Installation

7. INSTALL DECK TRIM SERVICE HOLE COVER Installation

8. INSTALL REAR NO. 1 FLOOR BOARD Installation

9. INSTALL REAR NO. 1 FLOOR BOARD SUB-ASSEMBLY Installation

10. INSTALL REAR NO. 2 FLOOR BOARD SUB-ASSEMBLY Installation

11. INSTALL DECK FLOOR BOX LH

HINT
Use the same procedure for the RH side and LH side.

12. INSTALL REAR NO. 4 FLOOR BOARD SUB-ASSEMBLY Installation

13. INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover) Installation

14. INSTALL DECK FLOOR BOX RH Installation

15. INSTALL REAR NO. 3 FLOOR BOARD Installation

16. INSTALL REAR NO. 2 FLOOR BOARD Installation

17. INSTALL REAR SIDE SEATBACK ASSEMBLY RH Installation

18. INSTALL REAR SEAT CUSHION ASSEMBLY Installation

19. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH Installation

20. INSTALL REAR DOOR SCUFF PLATE RH

HINT
Use the same procedure for the RH side and LH side Installation.