Removal

CRUISE CONTROL: DRIVING SUPPORT ECU: REMOVAL

1. PRECAUTION

NOTICE:
After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work Service Precautions.

2. REMOVE REAR NO. 3 FLOOR BOARD Removal

3. REMOVE DECK FLOOR BOX RH Removal

4. REMOVE REAR NO. 3 FLOOR BOARD UPPER PLATE Removal

5. DISCONNECT CABLE FROM AUXILIARY BATTERY NEGATIVE TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

6. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Removal

7. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY Removal

8. REMOVE ECU INTEGRATION BOX RH Removal

9. REMOVE DRIVING SUPPORT ECU

(a) Disengage the claw and remove the driving support ECU.