Installation

POWER DISTRIBUTION: POWER MANAGEMENT CONTROL ECU: INSTALLATION

1. INSTALL POWER MANAGEMENT CONTROL ECU

(a) Engage the 2 claws to install the power management control ECU.

2. INSTALL ECU INTEGRATION BOX

(a) Install the ECU integration box with the 2 nuts and bolt.

Nut - Torque : 5.5 Nm (56 kgf-cm, 49 in-lbf)

Bolt - Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)

(b) Engage the 3 clamps to connect the wire harness.

(c) Connect each connector.

3. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY Installation

4. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Installation

5. CONNECT CABLE TO AUXILIARY BATTERY NEGATIVE TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

6. INSTALL DECK FLOOR BOX RH Installation

7. INSTALL REAR NO. 3 FLOOR BOARD Installation

8. INSTALL REAR NO. 2 FLOOR BOARD Installation