Reassembly

DOOR / HATCH: BACK DOOR: REASSEMBLY

1. INSTALL BACK DOOR STAY BOLT LH Installation

2. INSTALL BACK DOOR STAY BOLT RH

HINT
Use the same procedure as for the LH side.

3. INSTALL BACK DOOR STAY ASSEMBLY LH Installation

4. INSTALL BACK DOOR STAY ASSEMBLY RH

HINT
Use the same procedure as for the LH side.

5. INSTALL REAR TELEVISION CAMERA ASSEMBLY (w/ Rear Monitor) Installation

6. INSTALL REAR WIPER MOTOR ASSEMBLY Installation

7. INSTALL REAR WIPER MOTOR GROMMET Installation

8. INSTALL REAR WIPER ARM AND BLADE ASSEMBLY Installation

9. INSTALL REAR WIPER ARM HEAD CAP Installation

10. INSTALL REAR WASHER NOZZLE Installation

11. INSPECT REAR WASHER NOZZLE Washer Nozzle (for Rear Side)

12. ADJUST REAR WASHER NOZZLE (for Rear Side)

13. INSTALL REAR SPOILER ASSEMBLY Installation

14. INSTALL LICENSE PLATE LIGHT ASSEMBLY LH Installation

15. INSTALL LICENSE PLATE LIGHT ASSEMBLY RH

HINT
Use the same procedure as for the LH side.

16. INSTALL BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY

17. INSTALL BACK DOOR LOCK ASSEMBLY Installation

18. INSTALL BACK DOOR PANEL CUSHION

(a) Engage the 2 claws to install 2 new back door panel cushions.





19. INSTALL BACK DOOR TRIM BOARD ASSEMBLY

(a) Engage the guide and 14 clips to install the back door trim board assembly.





(b) Engage the 3 guides and 3 claws to install the back door service hole cover LH.





HINT
Use the same procedure for both the RH and LH sides.

(c) Engage the 2 guides and 2 claws to install the back door hole cover.





20. INSTALL BACK DOOR SIDE GARNISH LH

(a) Engage the 2 claws and 2 clips to install the back door side garnish LH.





21. INSTALL BACK DOOR SIDE GARNISH RH

(a) Engage the 2 claws and 2 clips to install the back door side garnish RH.





22. INSTALL BACK DOOR CENTER GARNISH

(a) Engage the 4 claws and 4 clips to install the back door center garnish.





23. INSTALL DOOR PULL HANDLE

(a) Engage the 4 claws to install the door pull handle.





24. INSTALL BACK WINDOW GLASS CHANNEL LH

(a) Engage the grommet and clip to install the back window glass channel LH.





25. INSTALL BACK WINDOW GLASS CHANNEL RH

(a) Engage the grommet and clip to install the back window glass channel RH.





26. ADJUST REAR TELEVISION CAMERA OPTICAL AXIS (CAMERA POSITION SETTINGS) (w/ Advanced Parking Guidance System)

Calibration