Installation

DOOR LOCK: BACK DOOR LOCK: INSTALLATION

1. INSTALL BACK DOOR LOCK ASSEMBLY

HINT
Make sure to remove the string before installing a new back door lock assembly.

(a) Apply MP grease to the sliding parts of the back door lock assembly.

(b) Install the back door lock assembly with the 3 bolts.

Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)

(c) Connect the connector.

2. INSTALL BACK DOOR TRIM BOARD ASSEMBLY Reassembly

3. INSTALL BACK DOOR SIDE GARNISH LH Reassembly

4. INSTALL BACK DOOR SIDE GARNISH RH Reassembly

5. INSTALL BACK DOOR CENTER GARNISH Reassembly