Reassembly

INTERIOR PANELS / TRIM: UPPER INSTRUMENT PANEL: REASSEMBLY

1. INSTALL NO. 4 INSTRUMENT PANEL CUSHION

(a) Using hot-melt glue, install a new No. 4 instrument panel cushion as shown in the illustration.





2. INSTALL NO. 3 INSTRUMENT PANEL CUSHION

(a) Using hot-melt glue, install a new No. 3 instrument panel cushion as shown in the illustration.





3. INSTALL NO. 2 INSTRUMENT PANEL CUSHION

(a) Using hot-melt glue, install a new No. 2 instrument panel cushion as shown in the illustration.





4. INSTALL INSTRUMENT PANEL CUSHION

(a) Align the marking lines on the upper instrument panel with the ends of the instrument panel cushion and install a new instrument panel cushion as shown in the illustration.





Text in Illustration





5. INSTALL NO. 1 INSTRUMENT PANEL CUSHION

(a) Install a new No. 1 instrument panel cushion.





6. INSTALL INSTRUMENT PANEL SAFETY PAD RETAINER

(a) Install the instrument panel safety pad retainer with the 5 screws [D].





7. INSTALL INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY Installation

8. INSTALL NO. 2 INSTRUMENT PANEL WIRE

(a) Engage each clamp to install the No. 2 instrument panel wire.





9. INSTALL NAVIGATION ANTENNA ASSEMBLY (w/ Manual (SOS) Switch) Installation

10. INSTALL NO. 3 HEATER TO REGISTER DUCT SUB-ASSEMBLY

(a) Install the No. 3 heater to register duct sub-assembly with the 3 screws [D].





11. INSTALL NO. 1 HEATER TO REGISTER DUCT SUB-ASSEMBLY

(a) Install the No. 1 heater to register duct sub-assembly with the 3 screws [D].





12. INSTALL AUTOMATIC LIGHT CONTROL SENSOR Installation