Removal

2ZR-FXE LUBRICATION: OIL PUMP: REMOVAL

1. REMOVE CHAIN SUB-ASSEMBLY

Removal

2. REMOVE CRANKSHAFT TIMING SPROCKET

(a) Remove the crankshaft timing sprocket.





3. REMOVE NO. 2 CHAIN SUB-ASSEMBLY

(a) Temporarily tighten the crankshaft pulley and crankshaft pulley bolt.

(b) Using SST, remove the oil pump drive shaft sprocket nut while holding the crankshaft pulley.





SST : 09213-58014

91551-80840

SST : 09330-00021

(c) Remove SST, the crankshaft pulley and crankshaft pulley bolt.

(d) Remove the bolt, chain tensioner plate and chain damper spring.





(e) Remove the oil pump drive gear, oil pump drive shaft gear and No. 2 chain sub-assembly.





Text in Illustration





4. REMOVE NO. 1 CRANKSHAFT POSITION SENSOR PLATE Disassembly

5. REMOVE CRANKSHAFT TIMING GEAR KEY Disassembly

6. REMOVE OIL PAN DRAIN PLUG Disassembly

7. REMOVE NO. 2 OIL PAN SUB-ASSEMBLY

(a) Remove the 10 bolts and 2 nuts.





(b) Insert the blade of an oil pan seal cutter between the crankcase and oil pan. Cut through the sealer and remove the oil pan.





NOTICE:
Be careful not to damage the contact surfaces of the crankcase and oil pan.

8. REMOVE OIL PUMP ASSEMBLY

(a) Remove the 3 bolts and oil pump.