Initialization

METER / GAUGE / DISPLAY: METER / GAUGE SYSTEM: INITIALIZATION

1. MAINTENANCE REQUIRED REMINDER RESETTING PROCEDURE

HINT
* The TRIP change switch is located on the steering pad switch assembly.
* The km/h / MPH change switch is located on the hazard warning signal switch assembly.

(a) Turn the power switch on (IG).

(b) Press the TRIP change switch until the TRIP A meter appears.

(c) Turn the power switch off.

(d) Turn the power switch on (IG) while pressing and holding the km/h / MPH change switch. Hold the km/h / MPH change switch until the following conditions are met and 5 seconds have elapsed.

(1) The TRIP A meter shows "000000".

(2) The maintenance required reminder light goes off.