Reassembly

LIGHTING (EXT): REAR COMBINATION LIGHT ASSEMBLY: REASSEMBLY

1. INSTALL REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY

(a) Engage the claw.





(b) Connect the connector to install the rear combination light socket and wire sub-assembly.

2. INSTALL BACK-UP LIGHT BULB

(a) Install the back-up light bulb to the rear combination light socket and wire sub-assembly.

(b) Turn the rear combination light socket and wire sub-assembly with the back-up light bulb in the direction indicated by the arrow shown in the illustration to connect them as a unit.





3. INSTALL REAR TURN SIGNAL LIGHT BULB

(a) Install the rear turn signal light bulb to the rear combination light socket and wire sub-assembly.

(b) Turn the rear combination light socket and wire sub-assembly with the rear turn signal light bulb in the direction indicated by the arrow shown in the illustration to connect them as a unit.





4. INSTALL REAR COMBINATION LIGHT GASKET

(a) Install a new rear combination light gasket.





5. INSTALL REAR COMBINATION LIGHT BODY GASKET

(a) Install 2 new rear combination light body gaskets.