Part 2

NETWORKING: CAN COMMUNICATION SYSTEM: TERMINALS OF ECU (Continued..)

11. AIRBAG ECU ASSEMBLY





Text in Illustration





(a) Disconnect the airbag ECU assembly connector.





Text in Illustration





(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





12. INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY AND MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) (w/o LED Headlight or Glass Roof)





Text in Illustration





(a) Disconnect the main body ECU (multiplex network body ECU) connectors.





Text in Illustration





(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

V Bus Branch Lines





13. INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY AND MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) (w/ LED Headlight or Glass Roof)





Text in Illustration





(a) Disconnect the main body ECU (multiplex network body ECU) connectors.





Text in Illustration





(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

V Bus Branch Lines





14. SPIRAL CABLE WITH SENSOR SUB-ASSEMBLY (STEERING ANGLE SENSOR)

(a) Disconnect the spiral cable with sensor sub-assembly connector.





Text in Illustration





(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





15. YAW RATE SENSOR

(a) Disconnect the yaw rate sensor connector.





Text in Illustration





(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





16. POWER STEERING ECU ASSEMBLY





Text in Illustration





(a) Disconnect the power steering ECU assembly connectors.





Text in Illustration





(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





17. SMART KEY ECU ASSEMBLY (CERTIFICATION ECU)





Text in Illustration





(a) Disconnect the smart key ECU assembly connector.





Text in Illustration





(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





18. RADIO AND DISPLAY RECEIVER ASSEMBLY (for Radio and Display Type)





Text in Illustration





(a) Disconnect the radio and display receiver assembly connectors.





Text in Illustration





(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





19. NAVIGATION COMPUTER SUB-ASSEMBLY (for Navigation Receiver Type)





Text in Illustration





(a) Disconnect the navigation computer sub-assembly connectors.





Text in Illustration





(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





20. METER CIRCUIT PLATE





Text in Illustration





(a) Disconnect the meter circuit plate connector.





Text in Illustration





(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





21. AIR CONDITIONING AMPLIFIER ASSEMBLY





Text in Illustration





(a) Disconnect the air conditioning amplifier assembly connector.





Text in Illustration





(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





22. DRIVING SUPPORT ECU ASSEMBLY (w/ Dynamic Radar Cruise Control System)





Text in Illustration





(a) Disconnect the driving support ECU assembly connector.





Text in Illustration





(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





23. SEAT BELT CONTROL ECU (w/ Pre-collision System)





Text in Illustration





(a) Disconnect the seat belt control ECU connectors.





Text in Illustration





(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





24. PARKING ASSIST ECU (w/ Advanced Parking Guidance System)





Text in Illustration





(a) Disconnect the parking assist ECU connectors.









Text in Illustration





(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance: