Section 3: Verify Repair

1. Place car into "READY ON" mode. Wait about 30 seconds to allow the navigation unit to read the HDD data.

2. Turn on radio and test audio operation. Listen to front door and front dash speakers.

Is the sound quality acceptable?

^ YES - Continue to step 3.

^ NO - STOP. Verify wiring routing from steps 15 - 20. If wire routing is correct, diagnose per Repair Manual.

3. Test Safety Connect system. Press SOS button ONCE, listen to the audio prompt, and then press AGAIN (ONCE) to terminate call.

Is Safety Connect sound level acceptable?

^ YES - Repair is complete.

^ NO - STOP. Diagnose per Repair Manual.