Installation

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: STEERING ANGLE SENSOR: INSTALLATION

1. INSTALL SPIRAL CABLE WITH SENSOR SUB-ASSEMBLY

(a) Install the spiral cable with sensor sub-assembly Installation.

NOTICE:
* Do not replace the spiral cable with sensor sub-assembly with the negative (-) auxiliary battery cable connected and the power switch on (IG).
* Do not rotate the spiral cable with sensor sub-assembly without the steering wheel with the negative (-) auxiliary battery cable connected and the power switch on (IG).
* Ensure that the steering wheel is installed and aligned straight when inspecting the steering angle sensor.
* Do not remove the steering angle sensor from the spiral cable.

2. INSTALL STEERING COLUMN COVER Installation

3. TURN FRONT WHEELS TO FACE STRAIGHT AHEAD

4. ADJUST SPIRAL CABLE WITH SENSOR SUB-ASSEMBLY Installation

5. INSTALL STEERING WHEEL ASSEMBLY

Installation