Installation

NAVIGATION: NAVIGATION ECU: INSTALLATION

1. INSTALL EXTENSION MODULE

(a) Connect the connector and attach the clamp.





(b) Align the positioning boss of the extension module with the hole in the radio and display receiver assembly, and then place the extension module on the radio and display receiver assembly.





(c) Connect the connector.

(d) Connect the 3 connectors and install the navigation wire.

2. INSTALL NO. 2 RADIO BRACKET

(a) Install the No. 2 radio bracket with the 6 screws.





3. INSTALL NO. 1 RADIO BRACKET

(a) Install the No. 1 radio bracket with the 6 screws.





4. INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY

Installation

5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL