Removal

NAVIGATION: NAVIGATION ECU: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

2. REMOVE RADIO AND DISPLAY RECEIVER ASSEMBLY

Removal

3. REMOVE NO. 1 RADIO BRACKET

(a) Remove the 6 screws and remove the No. 1 radio bracket.





4. REMOVE NO. 2 RADIO BRACKET

(a) Remove the 6 screws and remove the No. 2 radio bracket.





5. REMOVE EXTENSION MODULE

(a) Disconnect the 3 connectors and remove the navigation wire.





(b) Disconnect the connector and remove the extension module.

(c) Detach the clamp.





(d) Disconnect the connector and remove the antenna cord.